THYRISTOR DESIGN AND REALIZATION
Written by Paul D. Taylor
Published by John Wiley & Sons
in 1987
ISBN: 047191178X
- Categorised in:
- SCIENCE AND TECHNOLOGY
- ELECTRICITY
- ELECTRONICS
THYRISTOR DESIGN AND REALIZATION
Written by Paul D. Taylor.
Stock no. 1206432
1st.
1987.
Hardback.
Nearly fine condition.
Glazed boards. 219 pages. B/w photos. B/w diagrams. ISBN: 047191178X.
Front cover
Contents
- Series Preface
- Preface
- List of Symbols
- Chapter 1 THYRISTOR BASICS
- 1.1 Introduction
- 1.2 Thyristor Characteristics
- 1.3 Thyristor Construction
- 1.4 Thyristor Types and Application
- 1.5 Thyristor Selection
- Appendix 1
- Chapter 2 PHYSICS OF OPERATION
- 2.1 Introduction
- 2.2 Thyristor OFF-State
- 2.3 Turn-ON Characteristics
- 2.4 ON-State
- 2.5 Turn-OFF
- Chapter 3 THYRISTOR DESIGN
- 3.1 Semiconductor Selection
- 3.2 Minority Carrier Lifetime
- 3.3 Vertical Structure Design
- 3.4 Emitter Shorts
- 3.5 Gate Design
- Chapter 4 SPECIAL THYRISTOR TYPES
- 4.1 The Gate Assisted Turn-OFF Thyristor (GATT)
- 4.2 The Asymmetric Thyristor (ASCR)
- 4.3 The Gate Turn-OFF (GTO) Thyristor
- 4.4 The Reverse Conducting Thyristor (RCT)
- 4.5 Light Activated Thyristors
- 4.6 The Field Controlled Thyristor (FCT)
- 4.7 The Triac
- 4.8 Ungated pnpn Switches
- 4.9 MOSFET - Thyristor Hybrids
- Chapter 5 POWER THYRISTOR HYBRIDS
- 5.1 Preparation of the Starting Silicon
- 5.2 Epitaxy
- 5.3 PN Junction Fabrication
- 5.4 Oxidations
- 5.5 Photolithography
- 5.6 Lifetime Control
- 5.7 Power Thyristor Contacts
- 5.8 Junction Passivation
- Chapter 6 THERMAL AND MECHANICAL DESIGN
- 6.1 Thermal Properties
- 6.2 Power Thyristor Package Designs
- 6.3 Thyristor Cooling Techniques