ENGINEERING WITH CERAMICS 2
Written by R. Freer, S. Newsam, G. Syers
Published by The Institute Of Ceramics
in 1987
- Categorised in:
- INDUSTRY
- ENGINEERING
- CERAMICS
ENGINEERING WITH CERAMICS 2
Written by R. Freer, S. Newsam, G. Syers.
Stock no. 562870
1st.
1987.
Hardback.
Fine condition.
British Cereamic Proceedings No. 39 (December 1987). The papers contained in this thirty-ninth volume of the Institute's Proceedings were presented at a meeting of the Basic Science Section held at The Royal Aeronautical Society, London 17-19th December, 1986. Blue glazed boards. B/w photos.
Front cover
Contents
- Microstructural Design of High-Temperature Ceramics
- Comparison of Fracture Toughness Testing Methods Applied to Alumina-Zirconia Materials
- Characterization of Nitride Ceramic-Metal Joints Brazed with Titanium Containing Alloys
- Creep, Oxidation and Microstructure in Silicon Nitrides
- High Temperature Fracture of Hot Isostatically Pressed Si3N4
- The High Temperature Corrsion of Silicon Nitride
- The Devitrification Behaviour of Grain Boundary Glasses in Silicon Nitride Densified with Mixed Magnesia, Yttria Additions
- Barium Oxide as a Sintering Aid for Silicon Nitride
- Synthesis of Sinter-Active Powder by Ultra-Rapid Quenching from Melts: Application to Mullite-Zirconia Preparation
- Fabrication with Electro-Refined PSZ Powders
- Manufacture of High Strenth Consistency R. B. S. N.
- Cyclic Fatigue of Advanced Ceramics by Repeated Indentation
- Impact Bursting Tests of Ceramic Cylinders using Elastomeric Inserts
- Surface Residual Stresses in Thermal Barrier Coatings
- Ceramic Strength Determination with Ring Loaded Disc Specimens
- Some Observations of Ceramic-Metal Sliding Wear
- The Sliding Wear of 97.5% Alumina and 99.5% Alumina Ceramic against Polycrystalline Silicon Carbide
- A Probalistic Basis for Designing with Ceramics
- How to Estimate Weibull Parameters
- A Review of the Effect of Contact Stresses on the Strength of Ceramics
- The Generation of Long-Term Creep Data for Silicon Nitride Ceramics
- Limitations to the Performance of Engineering Ceramics under Stress at High Temperatures
- New Constitutive Equations for Design of Ceramic Components
- Fabrication and Materials Evaluation of High Performance Aligned Ceramic Fibre Reinforced Glass Matrix Composite
- Failure Mechanisms in Silicon Carbide Fibre Reinforced Borosilicate Glass
- Anisotrophic Behaviour of FP, A1303 Fibre Reinforced CVI siC Matric Composites
- Mercury Porosimetry for Studying Ceramic Composites
- Back Stress and the Sintering of Composites
- Criteria for Microcrack Coalescence in Alumina with Well Dispersed Zirconia